Servo Grease CG 10 along with being a sprayable grease, shows remarkable adhesive properties with various colloidal graphite. Is has been specially developed for very severe lubrication conditions endured by open gear drives operating at a very low speed. The lubrication films stick strongly to the gear surface and are unaffected by temperature changes. Recommended for lubrication of open gear drives of rotary kilns, cement mills, sintering plants, ball mills etc.
passes FZG 12th stage.
High weld load of 650 Kg.
| NLGI Consistency | 0 |
|---|---|
| Penetration @ 25°C, cSt/td> | 375 |
| Dropping Point in °C | 131 |
| Base oil Viscosity, @ 40°C, cSt | 510 |
| Copper Corrosion, 100°C, 24 hrs | Pass |
| Weld Load, Kg | 700 |
| Wear Scar Dia, mm | 0.6 |
| Timken OK Load, lbs | 45 |
| Timken Retention, Minutes | 30 |
